How to mine

How to mine KawPow: Ravencoin, Neurai, Neoxa, Meowcoin and Clore

One algorithm, five chains. Naming the coin is what picks the chain, and the wallet changes with it.

Algorithm
KawPow, named per coin (-a rvn, xna, neoxa, meowcoin, clore)
Mines on
NVIDIA, AMD, Intel and Apple GPUs. Not the CPU
Dev fee
1%
Wallet
Each coin’s own format — see the table
VRAM
A DAG of a few GB, growing with the chain
Launcher
start_kawpow, with a block per coin

Five chains run KawPow: Ravencoin and four forks of it. They share one algorithm and one launcher, and the only thing that changes between them is the name you give -a and the wallet that goes with it. Name the coin, not the algorithm. -a kawpow is accepted but only names the algorithm; -a rvn names your chain outright, and each chain has its own address format.

The five coins

Coin-aWallet starts withA pool that answers
Ravencoin (RVN)rvnRstratum+ssl://pool.us.woolypooly.com:55555
stratum+ssl://rvn.2miners.com:16060
Neurai (XNA)xnaNstratum+ssl://stratum-asia.rplant.xyz:17029 (rplant carries Neurai on its Asia host only)
Neoxa (NEOX)neoxaGstratum+ssl://stratum-eu.rplant.xyz:17069
Meowcoin (MEWC)meowcoinMstratum+ssl://stratum-eu.rplant.xyz:17120
Clore (CLORE)cloreAstratum+ssl://stratum-eu.rplant.xyz:17063
stratum+ssl://stratum-asia.rplant.xyz:17063

The launcher has a block for each coin: the first is live and the rest are commented out. Each block carries both the -a name and a wallet placeholder for that chain, so switching coins means uncommenting a whole block, not just a pool line.

The command

Ravencoin, as the example. Change three things for another coin: the name, the wallet, the pool.

./bzminer \
  -a rvn \
  -p stratum+ssl://pool.us.woolypooly.com:55555 \
  -w RYOUR_RVN_WALLET \
  --worker rig1
# Neurai
./bzminer -a xna -p stratum+ssl://stratum-asia.rplant.xyz:17029 -w NYOUR_XNA_WALLET --worker rig1

# Neoxa
./bzminer -a neoxa -p stratum+ssl://stratum-eu.rplant.xyz:17069 -w GYOUR_NEOXA_WALLET --worker rig1

# Meowcoin
./bzminer -a meowcoin -p stratum+ssl://stratum-eu.rplant.xyz:17120 -w MYOUR_MEWC_WALLET --worker rig1

# Clore
./bzminer -a clore -p stratum+ssl://stratum-eu.rplant.xyz:17063 -w AYOUR_CLORE_WALLET --worker rig1

Nothing has to be compiled on the rig. NVIDIA specialises KawPow’s random program through the driver’s PTX JIT with precompiled kernels as a fallback; AMD and Apple use offline-built code objects. No CUDA toolkit, no ROCm, no Metal source.

Step by step, on your platform

Pick your platform. The steps are the same shape everywhere: get the archive, put your wallet in the launcher, run it, open the dashboard. Only the details change.

  1. Download and unzip

    Get bzminer_v100.82_windows.zip from the release page and unzip it anywhere you like — a folder on the desktop is fine. There is no installer and nothing is written outside that folder except the log. The SHA-256 of the archive is published beside it if you want to check the download.

  2. Put your wallet in the launcher

    Right-click start_kawpow.bat, choose Edit, and replace the placeholder wallet with your own. The pool is already filled in; other pools are listed as commented-out lines in the same file. Save it.

  3. Run it

    Double-click the launcher. The console dashboard opens in a window. Or, from a command prompt in that folder, the same thing by hand:

    bzminer.exe -a rvn -p stratum+ssl://pool.us.woolypooly.com:55555 -w RYOUR_RVN_WALLET --worker rig1

    Windows Terminal is the better console for it: the old conhost window cannot scroll the log pane with the mouse wheel and select text at the same time. Everything still works in the old console; it is just less convenient.

  4. Open the dashboard

    Browse to http://127.0.0.1:4014/ on the same machine. Nothing to install and nothing to sign in to.

Overclocking on Windows needs no special privileges for the power limit and the fan, and no administrator prompt to mine. CPU register tweaks that speed up some CPU algorithms are optional and use the PawnIO driver; install-pawnio.bat is in the archive for that, and mining carries on without it.

  1. Download and unpack

    wget https://github.com/bzminer/bzminer/releases/download/v100.82/bzminer_v100.82_linux.tar.gz
    tar -xzf bzminer_v100.82_linux.tar.gz
    cd bzminer_v100.82_linux

    A single static binary; no packages to install, and no CUDA toolkit or OpenCL SDK. The GPU driver is the only thing it needs from the system.

  2. Put your wallet in the launcher

    Open start_kawpow.sh in any editor and replace the placeholder wallet. Other pools are in the same file as commented-out lines.

  3. Run it

    ./start_kawpow.sh

    Or the same command written out, which is all the launcher does:

    ./bzminer \
      -a rvn \
      -p stratum+ssl://pool.us.woolypooly.com:55555 \
      -w RYOUR_RVN_WALLET \
      --worker rig1

    If you redirect the output to a file or run it under a service manager, bzminer notices there is no terminal and switches to the plain scrolling log screen on its own, so the file is readable rather than full of cursor codes.

  4. Open the dashboard

    http://127.0.0.1:4014/ on the rig itself. To see it from another machine on your network, add --set http_address=0.0.0.0 to the command — there is no password on it, so only do that on a network you trust.

Overclocking on Linux is privileged. Every clock, power and fan change is a driver write that needs root, so run the miner with sudo when you use the --oc-* flags. Without root the run still mines; each refused knob is named in the log with the reason.

Note

KawPow runs on the Apple Silicon GPU through Metal. The example command uses Ravencoin; swap the name, wallet and pool for the coin you want.

  1. Download, unpack, clear the quarantine flag

    tar -xzf bzminer_v100.82_macos.tar.gz
    cd bzminer_v100.82_macos
    xattr -dr com.apple.quarantine .

    The build is not signed with an Apple Developer ID, so macOS refuses to open it until the quarantine flag is cleared. That last line does it once, for the whole folder. The archive is Apple Silicon only; it does not run on Intel Macs.

  2. Put your wallet in the launcher

    Open start_kawpow.sh in TextEdit or any editor and replace the placeholder wallet.

  3. Run it

    ./start_kawpow.sh

    Or written out:

    ./bzminer \
      -a rvn \
      -p stratum+ssl://pool.us.woolypooly.com:55555 \
      -w RYOUR_RVN_WALLET \
      --worker rig1
  4. Open the dashboard

    http://127.0.0.1:4014/ in Safari or any browser on the Mac.

On a Mac the GPU is reached through Metal, and only algorithms with a Metal kernel use it: Ergo, KawPow, Ethash, Pearl, Warthog and CryptoNight. XELIS, RandomX and Verus mine on the CPU there. There is no overclocking on macOS.

Note

Type the coin name into Hive’s algorithm box — rvn, xna, neoxa, meowcoin or clore — not kawpow. The name is what picks the chain.

The clean way is Hive’s custom miner mechanism, which installs the current bzminer straight from the release page and lets you type any algorithm name. The Hive OS and mmpOS guide has the detail and the alternative of updating Hive’s own bzminer entry in place.

  1. Make a flight sheet

    Coin, wallet and pool as usual. For the miner pick Custom, then open Setup Miner Config.

  2. Fill in the custom miner form

    Miner namebzminer_custom
    Installation URLhttps://github.com/bzminer/bzminer/releases/download/v100.82/bzminer_custom-v100.82.tar.gz
    Hash algorithmrvn
    Wallet and worker template%WAL% — just the wallet. Hive passes the rig name separately and bzminer joins the two itself, so a template with a worker in it would name the worker twice.
    Pool URLstratum+ssl://pool.us.woolypooly.com:55555 — a bare host:port means plain stratum; write stratum+ssl://host:port in full for TLS
    Passx
    Extra config argumentsAny bzminer flag, on one line — overclocks, --devices, --cpu_threads.
  3. Apply it to the rig

    Hive downloads the package on first start. Hashrate, temperatures and shares appear on the Hive dashboard because bzminer serves Hive’s stats format itself on port 4014, so leave the web server on its default port.

Note

If mmpOS only offers kawpow for the coin you want, add --force_algo rvn (or xna, neoxa, meowcoin, clore) to the extra arguments so the chain is named.

mmpOS ships a bzminer miner profile. What it does not ship is the current version, so the profile gets a one-time download script, and any algorithm its own list does not know is reached with --force_algo.

  1. Create a miner profile

    Miner bzminer, the coin or algorithm, your pool and wallet. The rig name becomes the worker name.

  2. Install the current version

    In the profile, under Advanced, paste this into “Initiate command prior to miner launch”. It downloads v100.82 once and exits immediately on every later launch, so it costs nothing per restart. To move to a later release, change the version on the first line.

    export version="v100.82"
    if [ -f "/tmp/bzminer_${version}_linux.tar.gz" ]; then
    exit 0
    else
    cd /tmp; wget https://github.com/bzminer/bzminer/releases/download/${version}/bzminer_${version}_linux.tar.gz; tar -xvf bzminer_${version}_linux.tar.gz; sudo cp -adpR bzminer_${version}_linux/bzminer /opt/mmp/miners/bzminer/
    fi
  3. Name the algorithm if the list lacks it

    If rvn is not among the algorithms mmpOS offers for bzminer, pick any and add --force_algo rvn to the profile’s extra arguments. It overrides whatever the OS wrote into the pool block, which is exactly what it is for.

  4. Assign the profile to the rig

    Stats come from bzminer’s own web port, so keep the web server enabled on 4014.

What you should see

KawPow builds a DAG in each card’s memory before mining, so there is a pause at startup while it is generated, and a shorter one every time the chain crosses an epoch. The log says so. A card without room for the DAG is reported and skipped by name.

Power draw on KawPow is spiky — the random program changes every period — and boost clocks wander with it, which is why a core lock is the usual tuning move rather than an offset.

Tuning

KawPow is memory-bound with a real core component. A memory offset and a locked core clock:

./bzminer -a rvn -p stratum+ssl://pool.us.woolypooly.com:55555 -w RYOUR_RVN_WALLET \
  --oc-memory-clock-offset 800 --oc-lock-core-clock 1500 --oc-power-limit 200 \
  --oc-fan-speed "t:62[30-80] tm:84[50-100]"

Starting points, not measurements — every card is different. Cap power before raising clocks, change one thing at a time, and judge by accepted shares over an hour. The overclocking guide explains locks versus offsets and the per-card config.

Mining KawPow for XMR

MoneroOcean takes KawPow work for whichever KawPow coin it is currently on and pays in Monero. The wallet becomes a Monero address, the name is the plain kawpow because MoneroOcean picks the chain, and the algorithm must be pinned in the password:

./bzminer -a kawpow -p stratum+tcp://gulf.moneroocean.stream:10128 \
  -w 4YOUR_MONERO_WALLET --pass "rig1~kawpow"

Details, ports and the reason for the pin are in the MoneroOcean guide.

Problems

  • Shares are rejected. A wallet for the wrong coin is the classic case here: the five formats look alike. Press u to see what is being sent and check the first letter against the table above.
  • A card sits at zero. Either it is still generating its DAG, or it has no room for one. The log says which.
  • Clore: no pool connects. Pools have come and gone for Clore; the rplant ports above were answering when this build shipped. If they stop, any KawPow pool that lists Clore will do.

More in the troubleshooting guide.