How to mine
How to mine Ethereum Classic and EthereumPoW
The same algorithm, two DAG schedules. Get the -a name right or every share is worthless.
- Algorithm
- Ethash / etchash (
-a etchashfor ETC,-a ethashfor ETHW) - Mines on
- NVIDIA, AMD and Apple GPUs
- Dev fee
- 0.5%
- Wallet
- The chain’s
0xaddress (F2Pool: an account name) - VRAM
- A DAG of several GB, growing with the chain. ETC’s is about half ETHW’s
- Launcher
start_ethash, ETC first
Ethash and etchash are the same algorithm on two chains. Ethereum Classic halved its DAG epoch
length (ECIP-1099), so at the same block height the two chains want different DAGs. That
makes the -a name the single most important thing on the line:
Point -a ethash at an Ethereum Classic pool and every share is worthless. The miner builds the wrong DAG — a bigger one — and hashes against it happily. Use etchash (or etc) for Ethereum Classic and ethash (or ethw, ethereumpow) for EthereumPoW.
Before you start
- A wallet for the chain. Both use
0xaddresses. An ETC address and an ETHW address look identical and are different chains, so make sure the wallet is on the one you mine. - Ethereum Classic pools that answered a real subscribe when this build shipped:
stratum+tcp://etc.2miners.com:1010(2Miners)stratum+ssl://etc.2miners.com:11010(2Miners, TLS)
- EthereumPoW pools are few now.
stratum+tcp://ethw.f2pool.com:6688was the one still speaking stratum when this build shipped, and F2Pool signs you in with your F2Pool account name rather than a wallet address. - A GPU with room for the DAG. A card that can no longer hold an ETHW DAG will usually still mine ETC, because ETC’s is about half the size at a comparable height. A card without the room is reported and skipped.
The command
Ethereum Classic:
./bzminer \
-a etchash \
-p stratum+tcp://etc.2miners.com:1010 \
-w 0xYOUR_ETC_WALLET \
--worker rig1EthereumPoW, where the “wallet” is the F2Pool account name:
./bzminer -a ethash -p stratum+tcp://ethw.f2pool.com:6688 -w YOUR_F2POOL_ACCOUNT --worker rig1-a— the chain. This is the one to get right.-p— the pool; a second-pis a backup, and it must be the same chain.-w— the address, with nothing appended.
Step by step, on your platform
Pick your platform. The steps are the same shape everywhere: get the archive, put your wallet in the launcher, run it, open the dashboard. Only the details change.
-
Download and unzip
Get
bzminer_v100.82_windows.zipfrom the release page and unzip it anywhere you like — a folder on the desktop is fine. There is no installer and nothing is written outside that folder except the log. The SHA-256 of the archive is published beside it if you want to check the download. -
Put your wallet in the launcher
Right-click
start_ethash.bat, choose Edit, and replace the placeholder wallet with your own. The pool is already filled in; other pools are listed as commented-out lines in the same file. Save it. -
Run it
Double-click the launcher. The console dashboard opens in a window. Or, from a command prompt in that folder, the same thing by hand:
bzminer.exe -a etchash -p stratum+tcp://etc.2miners.com:1010 -w 0xYOUR_ETC_WALLET --worker rig1Windows Terminal is the better console for it: the old
conhostwindow cannot scroll the log pane with the mouse wheel and select text at the same time. Everything still works in the old console; it is just less convenient. -
Open the dashboard
Browse to
http://127.0.0.1:4014/on the same machine. Nothing to install and nothing to sign in to.
Overclocking on Windows needs no special privileges for the power limit and the fan, and no
administrator prompt to mine. CPU register tweaks that speed up some CPU algorithms are optional
and use the PawnIO driver; install-pawnio.bat is in the archive for that, and mining
carries on without it.
-
Download and unpack
wget https://github.com/bzminer/bzminer/releases/download/v100.82/bzminer_v100.82_linux.tar.gz tar -xzf bzminer_v100.82_linux.tar.gz cd bzminer_v100.82_linuxA single static binary; no packages to install, and no CUDA toolkit or OpenCL SDK. The GPU driver is the only thing it needs from the system.
-
Put your wallet in the launcher
Open
start_ethash.shin any editor and replace the placeholder wallet. Other pools are in the same file as commented-out lines. -
Run it
./start_ethash.shOr the same command written out, which is all the launcher does:
./bzminer \ -a etchash \ -p stratum+tcp://etc.2miners.com:1010 \ -w 0xYOUR_ETC_WALLET \ --worker rig1If you redirect the output to a file or run it under a service manager, bzminer notices there is no terminal and switches to the plain scrolling
logscreen on its own, so the file is readable rather than full of cursor codes. -
Open the dashboard
http://127.0.0.1:4014/on the rig itself. To see it from another machine on your network, add--set http_address=0.0.0.0to the command — there is no password on it, so only do that on a network you trust.
Overclocking on Linux is privileged. Every clock, power and fan change is a driver write
that needs root, so run the miner with sudo when you use the --oc-*
flags. Without root the run still mines; each refused knob is named in the log with the reason.
Ethash runs on the Apple Silicon GPU through Metal. The DAG comes out of unified memory, so leave the Mac room to breathe.
-
Download, unpack, clear the quarantine flag
tar -xzf bzminer_v100.82_macos.tar.gz cd bzminer_v100.82_macos xattr -dr com.apple.quarantine .The build is not signed with an Apple Developer ID, so macOS refuses to open it until the quarantine flag is cleared. That last line does it once, for the whole folder. The archive is Apple Silicon only; it does not run on Intel Macs.
-
Put your wallet in the launcher
Open
start_ethash.shin TextEdit or any editor and replace the placeholder wallet. -
Run it
./start_ethash.shOr written out:
./bzminer \ -a etchash \ -p stratum+tcp://etc.2miners.com:1010 \ -w 0xYOUR_ETC_WALLET \ --worker rig1 -
Open the dashboard
http://127.0.0.1:4014/in Safari or any browser on the Mac.
On a Mac the GPU is reached through Metal, and only algorithms with a Metal kernel use it: Ergo, KawPow, Ethash, Pearl, Warthog and CryptoNight. XELIS, RandomX and Verus mine on the CPU there. There is no overclocking on macOS.
Hive’s algorithm box must say etchash for Ethereum Classic and ethash for EthereumPoW. They build different DAGs, and the wrong one mines nothing useful.
The clean way is Hive’s custom miner mechanism, which installs the current bzminer straight from the release page and lets you type any algorithm name. The Hive OS and mmpOS guide has the detail and the alternative of updating Hive’s own bzminer entry in place.
-
Make a flight sheet
Coin, wallet and pool as usual. For the miner pick Custom, then open Setup Miner Config.
-
Fill in the custom miner form
Miner name bzminer_customInstallation URL https://github.com/bzminer/bzminer/releases/download/v100.82/bzminer_custom-v100.82.tar.gzHash algorithm etchashWallet and worker template %WAL%— just the wallet. Hive passes the rig name separately and bzminer joins the two itself, so a template with a worker in it would name the worker twice.Pool URL etc.2miners.com:1010— a barehost:portmeans plain stratum; writestratum+ssl://host:portin full for TLSPass xExtra config arguments Any bzminer flag, on one line — overclocks, --devices,--cpu_threads. -
Apply it to the rig
Hive downloads the package on first start. Hashrate, temperatures and shares appear on the Hive dashboard because bzminer serves Hive’s stats format itself on port 4014, so leave the web server on its default port.
If mmpOS writes ethash for an Ethereum Classic pool, add --force_algo etchash to the extra arguments. The name decides the DAG.
mmpOS ships a bzminer miner profile. What it does not ship is the current version, so the profile
gets a one-time download script, and any algorithm its own list does not know is reached with
--force_algo.
-
Create a miner profile
Miner bzminer, the coin or algorithm, your pool and wallet. The rig name becomes the worker name.
-
Install the current version
In the profile, under Advanced, paste this into “Initiate command prior to miner launch”. It downloads v100.82 once and exits immediately on every later launch, so it costs nothing per restart. To move to a later release, change the version on the first line.
export version="v100.82" if [ -f "/tmp/bzminer_${version}_linux.tar.gz" ]; then exit 0 else cd /tmp; wget https://github.com/bzminer/bzminer/releases/download/${version}/bzminer_${version}_linux.tar.gz; tar -xvf bzminer_${version}_linux.tar.gz; sudo cp -adpR bzminer_${version}_linux/bzminer /opt/mmp/miners/bzminer/ fi -
Name the algorithm if the list lacks it
If
etchashis not among the algorithms mmpOS offers for bzminer, pick any and add--force_algo etchashto the profile’s extra arguments. It overrides whatever the OS wrote into the pool block, which is exactly what it is for. -
Assign the profile to the rig
Stats come from bzminer’s own web port, so keep the web server enabled on 4014.
What you should see
A pause at startup while each card generates its DAG, announced in the log, and again each time the chain crosses an epoch. Then a steady hashrate: Ethash is the most predictable of the algorithms here, since every hash is the same 8 KB of DAG reads and nothing about the work changes between jobs.
Tuning
Ethash is bound by memory bandwidth almost entirely. The core spends most of its time waiting on DAG reads, so the clock buys very little and the power limit can come down hard:
./bzminer -a etchash -p stratum+tcp://etc.2miners.com:1010 -w 0xYOUR_ETC_WALLET \
--oc-memory-clock-offset 1100 --oc-power-limit 130 --oc-core-clock-offset -200 \
--oc-fan-speed "tm:80[45-100] t:60[30-80]"
Memory temperature is the one to watch on this algorithm; the tm: clause aims the fan at
it. On Linux the flags need root, and AMD cards take a fan setting only. The
overclocking guide has the rest.
Mining etchash for XMR
MoneroOcean takes etchash work and pays in Monero. The wallet becomes a Monero address, and the algorithm must be pinned in the password — an unpinned connection was handed KawPow work when this was tested, and an etchash miner given KawPow work mines nothing:
./bzminer -a etchash -p stratum+tcp://gulf.moneroocean.stream:10128 \
-w 4YOUR_MONERO_WALLET --pass "rig1~etchash"See the MoneroOcean guide.
Problems
- Every share is rejected while the hashrate looks fine. The
-aname does not match the pool’s chain. Check that before anything else. - A card is skipped. It has no room for the DAG. If you were mining ETHW, try ETC: its DAG is about half the size.
- F2Pool refuses the login. It wants your account name, not a
0xaddress. - An Intel card is not used. Intel is not listed for Ethash because nobody has mined it on one from this build. The backend may offer the device; it is not promised.
More in the troubleshooting guide.