How to mine
How to mine Tari (Cuckaroo29)
A 2^29-edge graph, not a hash. Why the rate is single digits, and the 10 GB of VRAM it needs.
- Algorithm
- Cuckaroo29, Tari's original (
-a c29) - Mines on
- NVIDIA GPUs; experimentally on the RX 7900 XTX and RX 9070 XT
- VRAM
- About 10 GB free on NVIDIA, 8.5 GB on AMD
- Dev fee
- 1%
- Paid in
- Tari at a Tari pool, or XMR through MoneroOcean
- Launcher
start_c29in the archive
Cuckaroo29 is a graph problem rather than a hash: bzminer builds a graph of 229 edges from chained SipHash, trims it down, and looks for a 42-edge cycle. Two things follow from that and both surprise people. The rate is in graphs per second — single digits are normal, and the number in the hashrate column is graphs, not hashes. And the graph has to fit in VRAM, so a card with less than about 10 GB free cannot mine it at all.
This is Tari's Cuckaroo29, which lolMiner calls CR29. It is not the Grin family — C29AE, C29D, C29Z and C29S are different algorithms and their pools will not take these shares.
Before you start
- A wallet for the pool you pick. A Tari address at a Tari pool; a Monero address at MoneroOcean, which mines Tari C29 and pays you in XMR.
- An NVIDIA card with ~10 GB free VRAM. The RTX 3090 is the card this is tuned and measured on; other NVIDIA GPUs run the reference settings.
- Or one of two AMD cards — RX 7900 XTX (
gfx1100) or RX 9070 XT (gfx1201), through the ordinary OpenCL driver. Experimental: correct, but not yet tuned. - There is no Intel or CPU mining for C29. The CPU verifies proofs and finishes the search, so it is busy, but it does not mine on its own.
The command
./bzminer \
-a c29 \
-p stratum+tcp://xtm-c29-us.kryptex.network:7040 \
-w YOUR_TARI_WALLET/rig1 \
--worker rig1-a c29— the algorithm.-p— the pool.-w— your wallet. On Kryptex the rig name goes after a slash in the wallet, as above.
On Kryptex, do not add --worker as well as the /rig1 suffix — the pool login would end up with two worker names on it.
Pools
Paid in Tari
# Kryptex
./bzminer -a c29 -p stratum+tcp://xtm-c29-us.kryptex.network:7040 -w "YOUR_TARI_WALLET/rig1" --pass x
# LuckyPool
./bzminer -a c29 -p stratum+tcp://taric29.luckypool.io:3111 -w YOUR_TARI_WALLET --worker rig1Paid in XMR, through MoneroOcean
MoneroOcean takes the C29 work and pays in Monero, so the wallet on this one is a
Monero address. The pool picks the algorithm from the password, so the ~c29
pin is not optional — without it you get whatever it defaults to, which this build cannot
mine:
./bzminer -a c29 -p stratum+tcp://gulf.moneroocean.stream:10128 \
-w 4YOUR_MONERO_WALLET --pass "rig1~c29"The same pin trick covers RandomX, KawPow, Ergo and CryptoNight there — the MoneroOcean guide has the whole set.
Step by step, on your platform
Pick your platform. The steps are the same shape everywhere: get the archive, put your wallet in the launcher, run it, open the dashboard. Only the details change.
-
Download and unzip
Get
bzminer_v100.82_windows.zipfrom the release page and unzip it anywhere you like — a folder on the desktop is fine. There is no installer and nothing is written outside that folder except the log. The SHA-256 of the archive is published beside it if you want to check the download. -
Put your wallet in the launcher
Right-click
start_c29.bat, choose Edit, and replace the placeholder wallet with your own. The pool is already filled in; other pools are listed as commented-out lines in the same file. Save it. -
Run it
Double-click the launcher. The console dashboard opens in a window. Or, from a command prompt in that folder, the same thing by hand:
bzminer.exe -a c29 -p stratum+tcp://xtm-c29-us.kryptex.network:7040 -w YOUR_TARI_WALLET/rig1 --worker rig1Windows Terminal is the better console for it: the old
conhostwindow cannot scroll the log pane with the mouse wheel and select text at the same time. Everything still works in the old console; it is just less convenient. -
Open the dashboard
Browse to
http://127.0.0.1:4014/on the same machine. Nothing to install and nothing to sign in to.
Overclocking on Windows needs no special privileges for the power limit and the fan, and no
administrator prompt to mine. CPU register tweaks that speed up some CPU algorithms are optional
and use the PawnIO driver; install-pawnio.bat is in the archive for that, and mining
carries on without it.
-
Download and unpack
wget https://github.com/bzminer/bzminer/releases/download/v100.82/bzminer_v100.82_linux.tar.gz tar -xzf bzminer_v100.82_linux.tar.gz cd bzminer_v100.82_linuxA single static binary; no packages to install, and no CUDA toolkit or OpenCL SDK. The GPU driver is the only thing it needs from the system.
-
Put your wallet in the launcher
Open
start_c29.shin any editor and replace the placeholder wallet. Other pools are in the same file as commented-out lines. -
Run it
./start_c29.shOr the same command written out, which is all the launcher does:
./bzminer \ -a c29 \ -p stratum+tcp://xtm-c29-us.kryptex.network:7040 \ -w YOUR_TARI_WALLET/rig1 \ --worker rig1If you redirect the output to a file or run it under a service manager, bzminer notices there is no terminal and switches to the plain scrolling
logscreen on its own, so the file is readable rather than full of cursor codes. -
Open the dashboard
http://127.0.0.1:4014/on the rig itself. To see it from another machine on your network, add--set http_address=0.0.0.0to the command — there is no password on it, so only do that on a network you trust.
Overclocking on Linux is privileged. Every clock, power and fan change is a driver write
that needs root, so run the miner with sudo when you use the --oc-*
flags. Without root the run still mines; each refused knob is named in the log with the reason.
C29 does not mine on macOS. It runs on NVIDIA through CUDA and on two AMD cards through OpenCL, and a Mac has neither. The rest of this page applies to your Windows, Linux or Hive OS rigs.
-
Download, unpack, clear the quarantine flag
tar -xzf bzminer_v100.82_macos.tar.gz cd bzminer_v100.82_macos xattr -dr com.apple.quarantine .The build is not signed with an Apple Developer ID, so macOS refuses to open it until the quarantine flag is cleared. That last line does it once, for the whole folder. The archive is Apple Silicon only; it does not run on Intel Macs.
-
Put your wallet in the launcher
Open
start_c29.shin TextEdit or any editor and replace the placeholder wallet. -
Run it
./start_c29.shOr written out:
./bzminer \ -a c29 \ -p stratum+tcp://xtm-c29-us.kryptex.network:7040 \ -w YOUR_TARI_WALLET/rig1 \ --worker rig1 -
Open the dashboard
http://127.0.0.1:4014/in Safari or any browser on the Mac.
On a Mac the GPU is reached through Metal, and only algorithms with a Metal kernel use it: Ergo, KawPow, Ethash, Pearl, Warthog and CryptoNight. XELIS, RandomX and Verus mine on the CPU there. There is no overclocking on macOS.
The clean way is Hive’s custom miner mechanism, which installs the current bzminer straight from the release page and lets you type any algorithm name. The Hive OS and mmpOS guide has the detail and the alternative of updating Hive’s own bzminer entry in place.
-
Make a flight sheet
Coin, wallet and pool as usual. For the miner pick Custom, then open Setup Miner Config.
-
Fill in the custom miner form
Miner name bzminer_customInstallation URL https://github.com/bzminer/bzminer/releases/download/v100.82/bzminer_custom-v100.82.tar.gzHash algorithm c29Wallet and worker template %WAL%— just the wallet. Hive passes the rig name separately and bzminer joins the two itself, so a template with a worker in it would name the worker twice.Pool URL xtm-c29-us.kryptex.network:7040— a barehost:portmeans plain stratum; writestratum+ssl://host:portin full for TLSPass xExtra config arguments Any bzminer flag, on one line — overclocks, --devices,--cpu_threads. -
Apply it to the rig
Hive downloads the package on first start. Hashrate, temperatures and shares appear on the Hive dashboard because bzminer serves Hive’s stats format itself on port 4014, so leave the web server on its default port.
mmpOS ships a bzminer miner profile. What it does not ship is the current version, so the profile
gets a one-time download script, and any algorithm its own list does not know is reached with
--force_algo.
-
Create a miner profile
Miner bzminer, the coin or algorithm, your pool and wallet. The rig name becomes the worker name.
-
Install the current version
In the profile, under Advanced, paste this into “Initiate command prior to miner launch”. It downloads v100.82 once and exits immediately on every later launch, so it costs nothing per restart. To move to a later release, change the version on the first line.
export version="v100.82" if [ -f "/tmp/bzminer_${version}_linux.tar.gz" ]; then exit 0 else cd /tmp; wget https://github.com/bzminer/bzminer/releases/download/${version}/bzminer_${version}_linux.tar.gz; tar -xvf bzminer_${version}_linux.tar.gz; sudo cp -adpR bzminer_${version}_linux/bzminer /opt/mmp/miners/bzminer/ fi -
Name the algorithm if the list lacks it
If
c29is not among the algorithms mmpOS offers for bzminer, pick any and add--force_algo c29to the profile’s extra arguments. It overrides whatever the OS wrote into the pool block, which is exactly what it is for. -
Assign the profile to the rig
Stats come from bzminer’s own web port, so keep the web server enabled on 4014.
What you should see
A single-digit rate in the hashrate column, because it is counting completed graphs. Shares are rare compared with a hash algorithm — one 42-cycle is a share — so judge a change by accepted shares over an hour, not by watching the rate for a minute. Every proof is checked against the Tari consensus reference on the CPU before it is sent, so a rejected share means the pool disagreed about the job, not that the solver produced rubbish.
Tuning
The graph build is memory-heavy and the trimming is compute-heavy, so C29 likes a memory overclock more than most GPU algorithms and still wants core clock for the trim rounds. The measured RTX 3090 point is a locked core with a mild offset and a solid memory offset:
./bzminer -a c29 -p stratum+tcp://xtm-c29-us.kryptex.network:7040 -w "YOUR_TARI_WALLET/rig1" \
--oc-lock-core-clock 1605 --oc-core-clock-offset 150 --oc-memory-clock-offset 1500Two local modes measure a card without a pool in the way. The first generates fixed work and is a pure solver benchmark; the second mines the real C29 protocol against a local proof-validating stratum server at difficulty 1:
./bzminer --bench -a c29 --devices 0
./bzminer --benchmark 1 -a c29 --devices 0
Picking the card matters here because of the VRAM: --devices takes a device number or
a PCI id, and on a mixed rig the AMD path also wants the other backends off —
--amd 1 --nvidia 0 --intel 0 --cpu 0 --devices 0000:04:00. The
devices guide covers the rest.
Problems
- It will not start, or fails on memory. C29 needs about 10 GB free on NVIDIA and 8.5 GB on AMD. A card that is also driving your monitors has less free than it has fitted; close what you can, or mine on a different card with
--devices. - The hashrate looks impossibly low. It is graphs per second, not hashes. Single digits are what this algorithm looks like.
- Every share is rejected on a Grin pool. This is Tari's C29 (
CR29), not C29AE/D/Z/S. Use a Tari pool or MoneroOcean. - MoneroOcean gives you the wrong work. The
~c29password pin is missing. - Kryptex shows two workers, or a strange worker name. The rig name is in the wallet after a slash; drop
--worker.
More in the troubleshooting guide.